Venturi tube
Venturi tube primary element for differential pressure flow measurement of liquids, gases and steam, with low residual pressure loss and short straight runs.
The Venturi tube is an engineered primary element that generates a differential pressure proportional to flow. Its cone shape recovers up to 95% of the generated DP, so the permanent pressure loss can be as low as 5% of the DP, and only short inlet and outlet runs are needed. It is made as a machined or welded design (internally machined) according to EN ISO 5167 and ASME MFC3, and covers sizes from 2 to 48" (50 to 1200 mm), with larger sizes on request. Optional annular chambers and multiple pressure taps are available, as well as a version for wet gas and steam wetness measurement.
Specifications
- Standards
- EN ISO 5167, ASME MFC3
- Design
- Machined or welded design (internally machined)
- Typical Uncalibrated Uncertainty
- up to ±1.5%
- Uncertainty With Wet Calibration
- up to ±0.2% (optional accredited wet calibration at operating Reynolds numbers)
- Pressure Recovery
- up to 95% of the generated DP
- Typical Pressure Loss
- down to 5% of the generated differential pressure
- Size
- 2…48" (50…1200 mm) per standard, larger sizes upon request
- Connections
- Weld ends or flange connections
- Options
- Annular chambers and multiple pressure taps
Enquire about this product
Pricing, availability, lead times and technical support — direct from our engineers.
Related products


Pressure Measurement — talk to our engineers
Pressure and differential-pressure process instruments